我在我的commodore 64基本项目中得到一个重新定义的数组错误
然而，我没有重新定义我的二维数组，也没有通过代码行不止一次!
1140行出现错误
有谁能帮我吗?谢谢!
代码:10 print "start"
20 rem: go to line 1100 in order to fill board with "."s because this is
30 rem: the board's initialization
40 gosub 1100
50 rem: looping from i to x allows for horizontal aspect of board to be printed
60 rem: x represents the width dimension of board, in this case, 8
70 for i = 1 to x
80 rem: looping from j to x allows for vertical aspect of board to be printed
90 rem: x represents the height dimension of board, in this case, 8
100 for j = 1 to x
110 rem: board initialized with "."s is printed
120 print b3$(i,j),
130 rem: end of first for loop, looping from i to x put on 130; , USED 4 TAB
140 next
150 print
160 rem: end of second for loop, looping from j to x
170 next
180 rem: checks what at the random number is equal to; places word vertically
190 rem: if rand is < 50 and places the word horizontally if rand is > 50
200 if r1 < 50 then gosub 1510
210 if r1 > 50 then print "no"
1000 rem: random num generator generates a random integer
1050 rem: between 0 and 100
1040 rem: values between 0 and 100, inclusive
1050 r1 = int(100*rnd(1))+1
1060 rem: Subroutine Fill
1070 rem: Purpose: read and data construct which fills b3$(x,x) with
1080 rem: either "."s or other random words depending on whether or not
1090 rem: the subroutine has been run before.
1100 x = 8
1110 rem: x represents the dimension for the board; in this case,8
1120 rem: took out
1130 rem: array b3 = board = specifications for width and height (8)
1140 dim b3$(x, x)
rem: i to x allows the horizontal aspect of board to be filled with "."s
1150 for i = 0 to x
1160 rem: j to x allows the vertical aspect of board to be filled with "."s
1170 for j = 0 to x
1180 rem: board filled with dots horizontally and vertically
1190 b3$(i, j) = "."
1200 rem: end of first nested for loop
1210 next
1220 rem: end of second nested for loop
1230 next
1240 return
在子例程之前需要一个end语句。为了确保不干扰其他内容，输入如下:
1099 end
否则，您的程序"完成"，然后再次运行所有子程序代码，只是为了好玩。
这是因为1140行之后的rem: i to x allows the horizontal aspect of board to be filled with "."s行没有任何数字。要解决这个问题，您可以删除该行或将数字1145(例如)放在前面。
第200行看起来很可疑，因为第1510行不存在。
200 if r1 < 50 then gosub 1510