我如何在RFduino闪存存储一个整数数组

Question

我正在尝试做一些研发，需要看看RFduino上的温度在5分钟的时间间隔内如何在未连接到串行控制台的位置变化，每秒测量一次。我想使用内置的闪存为此。(我正在存储字节，所以这是300字节的信息，应该适合1K的页面，对吗?)这是我已经提出的代码，但它只保存一个值的flash。或者我只能检索到一个值。它当前运行10秒(while count<10)。我如何保存和检索整个值数组?

// select a flash page that isn't in use (see Memory.h for more info)
#define  MY_FLASH_PAGE  251
// double level of indirection required to get gcc
// to apply the stringizing operator correctly
#define  str(x)   xstr(x)
#define  xstr(x)  #x
byte values[500];
int count = 0;
void setup() {
  Serial.begin(38400);
  Serial.println("All output will appear on the serial monitor.");
  // a flash page is 1K in length, so page 251 starts at address 251 * 1024 = 257024 = 3EC00 hex
  byte *p = (byte*)ADDRESS_OF_PAGE(MY_FLASH_PAGE);
  int rc;
  Serial.println("The data stored in flash page " str(MY_FLASH_PAGE) " contains: ");
  Serial.println(*p);
  Serial.print("Attempting to erase flash page " str(MY_FLASH_PAGE) ": ");
  rc = flashPageErase(PAGE_FROM_ADDRESS(p));
  if (rc == 0)
    Serial.println("Success");
  else if (rc == 1)
    Serial.println("Error - the flash page is reserved");
  else if (rc == 2)
    Serial.println("Error - the flash page is used by the sketch");
  Serial.println("The data stored in flash page " str(MY_FLASH_PAGE) " contains: ");
  Serial.println(*p);

  while (count<10){
    RFduino_ULPDelay(SECONDS(1));
    byte temp = RFduino_temperature(CELSIUS);
    Serial.println (count);
    Serial.println (temp);
    values[count]=temp;
    count++;
  }
  Serial.print("Attempting to write data to flash page " str(MY_FLASH_PAGE) ": ");
  rc = flashWriteBlock(p, &values, sizeof(values));
  if (rc == 0)
    Serial.println("Success");
  else if (rc == 1)
    Serial.println("Error - the flash page is reserved");
  else if (rc == 2)
    Serial.println("Error - the flash page is used by the sketch");
  Serial.println("The data stored in flash page " str(MY_FLASH_PAGE) " contains: ");
  Serial.println(*p);
}
void loop() {
  }

这是我的输出:

All output will appear on the serial monitor.
The data stored in flash page 251 contains: 
255
Attempting to erase flash page 251: Success
The data stored in flash page 251 contains: 
255
0
33
1
33
2
33
3
33
4
33
5
33
6
33
7
33
8
33
9
33
Attempting to write data to flash page 251: Success
The data stored in flash page 251 contains: 
33

我想让它写和检索所有10个值!

Answer 1

您可以像访问数组一样访问数据。

为了测试这一点，你可以(暂时)注释掉你的flash编写代码，并运行这个代码片段:

byte *p = (byte*)ADDRESS_OF_PAGE(MY_FLASH_PAGE);      
Serial.println("The data stored in flash page " str(MY_FLASH_PAGE) " contains: ");
for (count = 0; count < 10; count++)
{
    Serial.print(count);
    Serial.print(":");    
    Serial.print(p[count]);
    Serial.print("; ");    
}
Serial.println();

注意事项:RFduino_temperature(CELSIUS)返回float值