X86汇编程序中断代码

Question

    #include <studio.h>
    #include <dos.h>
    void interrupt (*int9save) (void)
    void interrupt eliminate_multiple_press(void)
    {
    int9save=getvect(9);
    setvect(9,eliminate_multiple_press);
    asm {
    MOV AH,0
    int 16h
    MOV scan_temp,AH
    CMP ZF,0
    }
    }
    void interrupt uneliminate_multiple_press()
    {
    setvect(9,int9save);
    }
    void main(void)
    {
    char str[100];
    int check=1;
    char scan_temp;
    unsigned int scan_code ;
    eliminate_multiple_press();
    printf("enter a wordn");
    scanf("%s",str);
    scan_code=(unsigned int) scan_temp;
    printf("the word is:n");
    printf("%s",str);
    uneliminate_multiple_press();
    return ;
    }

嘿，我在写汇编代码…我正试图解决一个中断问题，它要求我把一个长按钮当作一个按钮，我被困在这里!!所以请有人可以帮助我或给我一个方向如何继续…当我按下按钮ZF==0，当我离开按钮ZF==1，这可能会有所帮助谢谢

Answer 1

在你自己的键盘中断处理程序中，你可以有这样的东西(这是在YASM/NASM语法，未测试):

编辑:重写代码，添加注释和链接。

@my_int9:
    cli
    push ax     ; push ax (you can create a stack frame too, if you wish).
    push bx     ; push bx.
    in al,0x60  ; read scancode from keyboard port 60h to al.
    cmp al,[cs:last_scancode] ; compare the current and last scancodes.
    je @ready                 ; jump if its the same scancode, nothing to do.
    test al,0x80              ; test highest bit of al to see if it's release
                              ; or not.
                              ; test does logical AND without saving the result,
                              ; it only updates the flags
                              ; (and al,0x80 would be OK too).
    jnz @key_released         ; jump if it's a released key.
    ; OK, we have a new key.
@new_key:
    movzx bx,al               ; copy the scancode from al to bx.
    mov [cs:last_scancode],al ; store the current scancode into memory.
    ; Do something with the new key here.
    ; This is an example.
    mov al,1
    mov [cs:bx+keys_pressed],al ; set the corresponding byte of array to 1
                                ; (pressed).
    mov [cs:something_to_do],al ; set the flag "something to do" to 1.
                                ; (so that the main code needs to scan through
                                ; keys_pressed array only when there's at least
                                ; 1 key that hasn't been handled yet).
@key_released:
    ; Do something here upon the key release if you wish...
    ; This really depends on what do you want to if with released keys.
    ; If you want that keypresses are handled even after the corresponding key
    ; is  are released and that the the key release shouldn't cause any action,
    ; (in the case you don't poll that repeatedly), don't do anything here.
    ;
    ; If you want that keypresses are _not_ handled after the release, then set
    ; the corresponding byte of keys_pressed array to 0
    ; (uncomment the 3 lines below):
    ;
    ; and al,0x7F                     ; clear the highest bit.
    ; movzx bx,al                     ; copy the scancode from al to bx.
    ; mov [cs:bx+keys_pressed],byte 0 ; mark the key as not pressed.
@ready:
    mov al,0x20             ; write byte 20h to port 20h to inform PIC.
    out 0x20,al             ; (programmable interrupt controller) that it's OK
                            ; to continue sending interrupts.
    pop bx
    pop ax
    sti
    iret
last_scancode db 0
keys_to_handle db 0           ; in the main code you can poll for this.
                              ; After handling the keys, set this to 0.
keys_pressed times 128 db 0   ; db 128 dup 0 in some other assemblers
                              ; In the main program code scan through this if
                              ; keys_to_handle is not zero, and set the
                              ; corresponding byte to 0 to not handle it twice.

主代码(不属于中断控制器):

@main_code_loop:
    test [cs:keys_to_handle], byte 0xFF ; check if there are keys to handle.
    jz @no_keys_to_handle               ; no, nothing to do.
    ; here scan through entire keys_pressed array and set handled keys'
    ; corresponding bytes to 0.
    ; remember to loop through the entire array, there can be several keys to handle.
    mov [cs:keys_to_handle], byte 0     ; set keys_to_handle byte to 0.
@no_keys_to_handle:
    ; do something else

一些有用的链接:

OSDev: Interrupts:一篇关于中断的有用文章。

OSDev: "8042" PS/2 Controller:关于键盘处理的有用信息。

OSDev: 8259 PIC: 8259可编程中断控制器信息