我们安装了清漆，但效果不理想。
我设置Varnish监听端口80,Apache监听端口8080。当我重新启动清漆和apache的页面不断加载和加载。我还试图禁用CSF.
之后显示:错误503后端获取失败冥想大师:XID: 2818051
有人知道如何解决这个问题吗?
规格:2.6.32-604.30.3.lve1.3.63.el6。x86_64 #1 SMP星期日Sep 27 06:34:10 EDT 2015 x86_64 x86_64 x86_64 x86_64 GNU/LinuxCentOS - Cloudlinux 6.7
配置文件下面:
httpd . conf
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/etc/httpd"
HostnameLookups Off
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80
<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User apache
Group apache
</IfModule>
#LoadModule dummy_module /usr/lib/apache/mod_dummy.so
Include /etc/httpd/conf/extra/httpd-phpmodules.conf
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin admin@localhost
DocumentRoot "/var/www/html"
<IfModule dir_module>
<IfModule dir_module>
DirectoryIndex index.html index.htm index.shtml index.php index.php5 index.php4 index.php3 index.phtml index.cgi
</IfModule>
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ".ht*">
Require all denied
</Files>
#
# The following lines prevent .user.ini files from being viewed by Web clients.
#
<Files ".user.ini">
Require all denied
</Files>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/httpd/error_log
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
<IfModule log_config_module>
#replace %b with %O for more accurate logging
<IfModule mod_logio.c>
LogFormat "%a %l %u %t "%r" %>s %O "%{Referer}i" "%{User-Agent}i"" combined
LogFormat "%a %l %u %t "%r" %>s %O" common
LogFormat "%O %I" bytes
LogFormat "%a %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i" %I %O" combinedio
</IfModule>
CustomLog /var/log/httpd/access_log common
</IfModule>
<IfModule alias_module>
# Include some DirectAdmin alias
Include conf/extra/httpd-alias.conf
</IfModule>
#DefaultType text/plain
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-gzip .tgz
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddHandler cgi-script .cgi
AddHandler type-map var
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
AddType video/x-ms-asf .avi
AddType video/mpeg .mpg
AddType video/mpeg .mpeg
AddType video/quicktime .mov
AddType video/x-ms-wmv .wmv
</IfModule>
#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile off
#######################################################################################
# For user configurations not maintained by DirectAdmin. Empty by default.
#######################################################################################
Include conf/extra/httpd-includes.conf
#######################################################################################
# Supplemental configuration
#######################################################################################
# Options and AllowOverrides
Include conf/extra/httpd-directories.conf
# Nginx reverse proxy configuration
Include conf/extra/httpd-nginx.conf
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
Include conf/extra/httpd-info.conf
# Suphp
Include conf/extra/httpd-suphp.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
# Deflate module settings
Include conf/extra/httpd-deflate.conf
#######################################################################################
# Do not change anything in files below, because they are rewritten by DirectAdmin #
#######################################################################################
# This is needed for PHP
Include conf/extra/httpd-php-handlers.conf
# Virtual hosts
Include conf/extra/httpd-vhosts.conf
# All the DirectAdmin vhosts
Include conf/extra/directadmin-vhosts.conf
#######################################################################################
# End of included files that are rewritten by DirectAdmin #
#######################################################################################
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# Alias for RoundCube webmail
# Alias /roundcube /var/www/html/roundcube/
default.vcl
#
# This is an example VCL file for Varnish.
#
# It does not do anything by default, delegating control to the
# builtin VCL. The builtin VCL is called when there is no explicit
# return statement.
#
# See the VCL chapters in the Users Guide at https://www.varnish-cache.org/docs/
# and http://varnish-cache.org/trac/wiki/VCLExamples for more examples.
# Marker to tell the VCL compiler that this VCL has been adapted to the
# new 4.0 format.
vcl 4.0;
# Default backend definition. Set this to point to your content server.
backend default {
.host = "149.210.175.70";
.port = "80";
}
sub vcl_recv {
# Happens before we check if we have this in cache already.
#
# Typically you clean up the request here, removing cookies you don't need,
# rewriting the request, etc.
}
sub vcl_backend_response {
# Happens after we have read the response headers from the backend.
#
# Here you clean the response headers, removing silly Set-Cookie headers
# and other mistakes your backend does.
}
sub vcl_deliver {
# Happens when we have all the pieces we need, and are about to send the
# response to the client.
#
# You can do accounting or modifying the final object here.
Sysconfig/清漆
# Configuration file for varnish
#
# /etc/init.d/varnish expects the variable $DAEMON_OPTS to be set from this
# shell script fragment.
#
# Maximum number of open files (for ulimit -n)
NFILES=131072
# Locked shared memory (for ulimit -l)
# Default log size is 82MB + header
MEMLOCK=82000
# Maximum number of threads (for ulimit -u)
NPROCS="unlimited"
# Maximum size of corefile (for ulimit -c). Default in Fedora is 0
# DAEMON_COREFILE_LIMIT="unlimited"
# Set this to 1 to make init script reload try to switch vcl without restart.
# To make this work, you need to set the following variables
# explicit: VARNISH_VCL_CONF, VARNISH_ADMIN_LISTEN_ADDRESS,
# VARNISH_ADMIN_LISTEN_PORT, VARNISH_SECRET_FILE, or in short,
# use Alternative 3, Advanced configuration, below
RELOAD_VCL=1
# This file contains 4 alternatives, please use only one.
## Alternative 1, Minimal configuration, no VCL
#
# Listen on port 6081, administration on localhost:6082, and forward to
# content server on localhost:8080. Use a fixed-size cache file.
#
DAEMON_OPTS="-a :80
-T localhost:6082
-b localhost:8080
-u varnish -g varnish
-s file,/var/lib/varnish/varnish_storage.bin,1G"
## Alternative 2, Configuration with VCL
#
# Listen on port 6081, administration on localhost:6082, and forward to
# one content server selected by the vcl file, based on the request. Use a
# fixed-size cache file.
#
#DAEMON_OPTS="-a :6081
# -T localhost:6082
# -f /etc/varnish/default.vcl
# -u varnish -g varnish
# -S /etc/varnish/secret
# -s file,/var/lib/varnish/varnish_storage.bin,1G"
## Alternative 3, Advanced configuration
#
# See varnishd(1) for more information.
#
# # Main configuration file. You probably want to change it :)
VARNISH_VCL_CONF=/etc/varnish/default.vcl
#
# # Default address and port to bind to
# # Blank address means all IPv4 and IPv6 interfaces, otherwise specify
# # a host name, an IPv4 dotted quad, or an IPv6 address in brackets.
# VARNISH_LISTEN_ADDRESS=
VARNISH_LISTEN_PORT=80
#
# # Telnet admin interface listen address and port
VARNISH_ADMIN_LISTEN_ADDRESS=127.0.0.1
VARNISH_ADMIN_LISTEN_PORT=6082
#
# # Shared secret file for admin interface
VARNISH_SECRET_FILE=/etc/varnish/secret
#
# # The minimum number of worker threads to start
VARNISH_MIN_THREADS=50
#
# # The Maximum number of worker threads to start
VARNISH_MAX_THREADS=1000
#
# # Idle timeout for worker threads
VARNISH_THREAD_TIMEOUT=120
#
# # Cache file size: in bytes, optionally using k / M / G / T suffix,
# # or in percentage of available disk space using the % suffix.
VARNISH_STORAGE_SIZE=256M
#
# # Backend storage specification
VARNISH_STORAGE="malloc,${VARNISH_STORAGE_SIZE}"
#
# # Default TTL used when the backend does not specify one
VARNISH_TTL=120
#
# # DAEMON_OPTS is used by the init script. If you add or remove options, make
# # sure you update this section, too.
DAEMON_OPTS="-a ${VARNISH_LISTEN_ADDRESS}:${VARNISH_LISTEN_PORT}
-f ${VARNISH_VCL_CONF}
-T ${VARNISH_ADMIN_LISTEN_ADDRESS}:${VARNISH_ADMIN_LISTEN_PORT}
-t ${VARNISH_TTL}
-p thread_pool_min=${VARNISH_MIN_THREADS}
-p thread_pool_max=${VARNISH_MAX_THREADS}
-p thread_pool_timeout=${VARNISH_THREAD_TIMEOUT}
-u varnish -g varnish
-S ${VARNISH_SECRET_FILE}
-s ${VARNISH_STORAGE}"
#
## Alternative 4, Do It Yourself. See varnishd(1) for more information.
#
# DAEMON_OPTS=""
您的httpd.conf告诉Apache也在端口80上侦听。Apache或Varnish将无法启动
Varnish监听公共服务器的80端口。Apache可以运行在端口80上——但是在一个单独的服务器上。如果您在同一台服务器上同时运行Varnish和Apache，那么Apache需要在不同的端口上运行，例如8080端口。