我想删除单个翻译单元的集合编译标志。有办法做到这一点吗?(例如使用set_property
?)
注意:编译标志没有-fno-name
否定(无论出于何种原因)。
我试过:
get_property(FLAGS TARGET target PROPERTY COMPILE_FLAGS)
string(REPLACE "-fname" "" FLAGS ${FLAGS})
set_property(TARGET target PROPERTY COMPILE_FLAGS ${FLAGS})
没有任何运气。我要删除的属性是CMAKE_CXX_FLAGS
的一部分,因此这不起作用。
这个特定的解决方案(?)既适用于目标,也适用于单个翻译单元(单个.cpp
-文件)。它将需要CMake 3.7
或更新版本,因为我们需要使用3.7
中添加的BUILDSYSTEM_TARGETS
属性迭代所有现有目标。如果无法使用3.7
或更新版本,可以调整apply_global_cxx_flags_to_all_targets()
以获取目标列表并手动指定它们。请注意,您应该将下面的宏视为概念验证。除了非常小的项目外,他们可能需要一些调整和改进。
第一步是遍历所有现有目标,并将CMAKE_CXX_FLAGS
应用于每个目标。完成此操作后,我们将清除CMAKE_CXX_FLAGS
。下面你会发现一个宏可以做到这一点。该宏可能应该在顶级CMakeLists.txt
底部的某个位置调用,当所有目标都已创建、所有标志都已设置等时。需要注意的是,命令get_property(_targets DIRECTORY PROPERTY BUILDSYSTEM_TARGETS)
在目录级别工作,因此如果使用add_subdirectory()
,则必须在该子目录的顶级CMakeLists.txt
中调用该宏。
#
# Applies CMAKE_CXX_FLAGS to all targets in the current CMake directory.
# After this operation, CMAKE_CXX_FLAGS is cleared.
#
macro(apply_global_cxx_flags_to_all_targets)
separate_arguments(_global_cxx_flags_list UNIX_COMMAND ${CMAKE_CXX_FLAGS})
get_property(_targets DIRECTORY PROPERTY BUILDSYSTEM_TARGETS)
foreach(_target ${_targets})
target_compile_options(${_target} PUBLIC ${_global_cxx_flags_list})
endforeach()
unset(CMAKE_CXX_FLAGS)
set(_flag_sync_required TRUE)
endmacro()
该宏首先从CMAKE_CXX_FLAGS
创建一个列表,然后获取所有目标的列表,并将CMAKE_CXX_FLAGS
应用于每个目标。最后,CMAKE_CXX_FLAGS
被清除。_flag_sync_required
用于指示是否需要强制重写缓存的变量。
下一步取决于您是要从目标还是从特定翻译单元中删除标志。如果你想从目标中删除一个标志,你可以使用类似的宏:
#
# Removes the specified compile flag from the specified target.
# _target - The target to remove the compile flag from
# _flag - The compile flag to remove
#
# Pre: apply_global_cxx_flags_to_all_targets() must be invoked.
#
macro(remove_flag_from_target _target _flag)
get_target_property(_target_cxx_flags ${_target} COMPILE_OPTIONS)
if(_target_cxx_flags)
list(REMOVE_ITEM _target_cxx_flags ${_flag})
set_target_properties(${_target} PROPERTIES COMPILE_OPTIONS "${_target_cxx_flags}")
endif()
endmacro()
从一个特定的翻译单元中删除一个标志有点棘手(除非我错过了一些东西)。无论如何,我们的想法是首先从文件所属的目标获得编译选项,然后将所述选项应用于该目标中的所有源文件,这使我们能够操作单个文件的编译标志。我们通过为每个要从中删除标志的文件维护一个编译标志的缓存列表来实现这一点,当请求删除时,我们将其从缓存列表中删除,然后重新应用其余的标志。目标本身的编译选项将被清除。
#
# Removes the specified compiler flag from the specified file.
# _target - The target that _file belongs to
# _file - The file to remove the compiler flag from
# _flag - The compiler flag to remove.
#
# Pre: apply_global_cxx_flags_to_all_targets() must be invoked.
#
macro(remove_flag_from_file _target _file _flag)
get_target_property(_target_sources ${_target} SOURCES)
# Check if a sync is required, in which case we'll force a rewrite of the cache variables.
if(_flag_sync_required)
unset(_cached_${_target}_cxx_flags CACHE)
unset(_cached_${_target}_${_file}_cxx_flags CACHE)
endif()
get_target_property(_${_target}_cxx_flags ${_target} COMPILE_OPTIONS)
# On first entry, cache the target compile flags and apply them to each source file
# in the target.
if(NOT _cached_${_target}_cxx_flags)
# Obtain and cache the target compiler options, then clear them.
get_target_property(_target_cxx_flags ${_target} COMPILE_OPTIONS)
set(_cached_${_target}_cxx_flags "${_target_cxx_flags}" CACHE INTERNAL "")
set_target_properties(${_target} PROPERTIES COMPILE_OPTIONS "")
# Apply the target compile flags to each source file.
foreach(_source_file ${_target_sources})
# Check for pre-existing flags set by set_source_files_properties().
get_source_file_property(_source_file_cxx_flags ${_source_file} COMPILE_FLAGS)
if(_source_file_cxx_flags)
separate_arguments(_source_file_cxx_flags UNIX_COMMAND ${_source_file_cxx_flags})
list(APPEND _source_file_cxx_flags "${_target_cxx_flags}")
else()
set(_source_file_cxx_flags "${_target_cxx_flags}")
endif()
# Apply the compile flags to the current source file.
string(REPLACE ";" " " _source_file_cxx_flags_string "${_source_file_cxx_flags}")
set_source_files_properties(${_source_file} PROPERTIES COMPILE_FLAGS "${_source_file_cxx_flags_string}")
endforeach()
endif()
list(FIND _target_sources ${_file} _file_found_at)
if(_file_found_at GREATER -1)
if(NOT _cached_${_target}_${_file}_cxx_flags)
# Cache the compile flags for the specified file.
# This is the list that we'll be removing flags from.
get_source_file_property(_source_file_cxx_flags ${_file} COMPILE_FLAGS)
separate_arguments(_source_file_cxx_flags UNIX_COMMAND ${_source_file_cxx_flags})
set(_cached_${_target}_${_file}_cxx_flags ${_source_file_cxx_flags} CACHE INTERNAL "")
endif()
# Remove the specified flag, then re-apply the rest.
list(REMOVE_ITEM _cached_${_target}_${_file}_cxx_flags ${_flag})
string(REPLACE ";" " " _cached_${_target}_${_file}_cxx_flags_string "${_cached_${_target}_${_file}_cxx_flags}")
set_source_files_properties(${_file} PROPERTIES COMPILE_FLAGS "${_cached_${_target}_${_file}_cxx_flags_string}")
endif()
endmacro()
示例
我们有一个非常简单的项目结构:
source/
CMakeLists.txt
foo.cpp
bar.cpp
main.cpp
假设foo.cpp
违反了-Wunused-variable
,并且我们希望在该特定文件上禁用该标志。对于bar.cpp
,我们希望禁用-Werror
。对于main.cpp
,无论出于何种原因,我们都希望删除-O2
。
CMakeLists.txt
cmake_minimum_required(VERSION 3.7 FATAL_ERROR)
project(MyProject)
# Macros omitted to save space.
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -O2 -Wunused-variable")
# CMake will apply this to all targets, so this will work too.
add_compile_options("-Werror")
add_executable(MyTarget foo.cpp bar.cpp main.cpp)
apply_global_cxx_flags_to_all_targets()
remove_flag_from_file(MyTarget foo.cpp -Wunused-variable)
remove_flag_from_file(MyTarget bar.cpp -Werror)
remove_flag_from_file(MyTarget main.cpp -O2)
如果您想从目标中移除标志,则可以使用remove_flag_from_target()
,例如:remove_flag_from_target(MyTarget -O2)
结果
应用宏前的输出
clang++ -Werror -O2 -Wunused-variable -o foo.cpp.o -c foo.cpp
clang++ -Werror -O2 -Wunused-variable -o bar.cpp.o -c bar.cpp
clang++ -Werror -O2 -Wunused-variable -o main.cpp.o -c main.cpp
应用宏后的输出
clang++ -Werror -O2 -o foo.cpp.o -c foo.cpp
clang++ -O2 -Wunused-variable -o bar.cpp.o -c bar.cpp
clang++ -Werror -Wunused-variable -o main.cpp.o -c main.cpp
最后注释
如前所述,这应被视为概念的证明。有几个紧迫的问题需要考虑:
- 它只考虑
CMAKE_CXX_FLAGS
(所有构建类型通用),而不考虑CMAKE_CXX_FLAGS_<DEBUG|RELEASE>
等 - 宏一次只能处理一个标志
remove_flag_from_file()
一次只能处理一个目标和输入文件作为输入remove_flag_from_file()
需要一个文件名,而不是路径。传递例如source/foobar/foobar.cpp
将不起作用,因为source/foobar/foobar.cpp
将与foobar.cpp
进行比较。这可以通过使用get_source_file_property()
和LOCATION
属性并设置_file
是完整路径的先决条件来解决。- 如果一个目标有两个或多个同名文件,会发生什么情况
- CCD_ 38可能会得到很大的优化和改进
- 对
separate_arguments()
的调用假定为Unix
其中大多数应该很容易修复。
我希望这至少能推动你朝着解决这个问题的正确方向前进。如果我需要在答案中添加一些内容,请告诉我。
如果没有编译标志否定选项(这将是CMake处理非IDE配置程序的标准方式),则必须从CMAKE_CXX_FLAGS
中删除此编译标志。
可能的方法
-
将
COMPILE_FLAGS
作为源文件属性,该属性是来自同名目录属性的INHERITED
。现在,您可以单独修改每个目录和源文件的COMPILE_FLAGS
属性:# Remove '-fname' from global flags string(REPLACE "-fname" "" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") define_property( SOURCE PROPERTY COMPILE_FLAGS INHERITED BRIEF_DOCS "brief-doc" FULL_DOCS "full-doc" ) # Add '-fname' for directory set_directory_properties(PROPERTIES COMPILE_FLAGS "-fname") add_executable(${PROJECT_NAME} "main.cpp") # Remove '-fname' from source file set_source_files_properties("main.cpp" PROPERTIES COMPILE_FLAGS "")
-
如果某些属性(如
COMPILE_OPTIONS
)仅在目标级别上可用,则必须将希望具有不同设置的文件移动到单独的新目标中。这可以通过使用OBJECT库来完成:
# Remove '-fname' from global flags string(REPLACE "-fname" "" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") # Set '-fname' for directory, but if you also use add_compile_options() be aware that # this will overwrite your previous setting. Append/remove properties instead. set_directory_properties( PROPERTIES COMPILE_OPTIONS "-fname" ) # Remove '-fname' from source file(s) in separate object library target add_library(${PROJECT_NAME}_no_name OBJECT "main.cpp") set_target_properties( ${PROJECT_NAME}_no_name PROPERTIES COMPILE_OPTIONS "" ) # Use object library target in e.g. executable target add_executable(${PROJECT_NAME} $<TARGET_OBJECTS:${PROJECT_NAME}_no_name>)
参考文献
- CMake逐文件优化
- 覆盖单个文件的编译标志
- clang整理cmake从检查中排除文件
一个(不可扩展和不可移植)解决方案正在创建一个带有修改标志的自定义命令。我得到的一个最小的例子是:
cmake_minimum_required(VERSION 2.8)
project(test)
# Some flags
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -O2 -Wall")
# Remove unwanted flag
string(REPLACE "-Wall" "" CUSTOM_FLAGS ${CMAKE_CXX_FLAGS})
# Split the flags into a cmake list (; separated)
separate_arguments(CUSTOM_FLAGS UNIX_COMMAND ${CUSTOM_FLAGS})
# Custom command to build your one file.
add_custom_command(
OUTPUT out.o
COMMAND ${CMAKE_CXX_COMPILER}
ARGS ${CUSTOM_FLAGS} -c ${CMAKE_SOURCE_DIR}/out.cpp
-o ${CMAKE_BINARY_DIR}/out.o
MAIN_DEPENDENCY out.cpp)
add_executable(test test.cpp out.o)
虽然远非完美,但它确实有效,这才是最重要的。separate_arguments
是必要的,因为否则CUSTOM_FLAGS
中的所有空间都会被转义(不知道如何快速求解)。