我使用的是"模块上的CL-SOM-AM57x-TI AM5728/AM5718系统"。
我试着安装了由compulab:Link提供的Yocto Linux。
我选择了自动安装,但安装后出现了一些错误,无法在该设备上启动Yocto Linux。(自动安装说明(
我在下面发布了错误。如何正确安装Yocto Linux?为什么会出现此错误?
Hit any key to stop autoboot: 0
Saving Environment to SPI Flash...
SF: Detected w25q16cl with page size 256 Bytes, erase size 4 KiB, total 2 MiB,
mapped at 5c000000
Erasing SPI flash...Writing to SPI flash...done
switch to partitions #0, OK
mmc1(part 0) is current device
** File not found kernel.img **
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree
在引导加载程序(可能是u-boot(中,您必须指定引导环境。要加载内核和设备树,必须设置bootcmd。要从用户空间访问板,需要一个文件系统,这必须在bootargs变量中提及。
太晚了,但也许有人会发现它很有用:
您的uboot环境设置不正确,所以请尝试设置默认设置,如您提供的信息中所示,故障排除部分
- 停止自动启动按键
- 设置默认环境
env默认值-
- 启动设备
启动