设置树莓派3 USB麦克风(创意爆音器)

Question

有人能帮我设置我的RPi 3吗?我想用我的游戏耳机(Creative Technology, Ltd Sound Blaster tactical (3D) Sigma声卡)建立一个语音到文本/语音识别。扬声器现在可以工作了，但不幸的是我在设置麦克风时卡住了。

在我调整设置之前，我可以记录/创建wav文件，但每当我播放wav文件时，没有声音。在更改了一些设置后，我在下面遇到了新的错误。提前感谢!

错误:

pi@raspberrypi:~ $ arecord -D plughw:0,0 test9.wav
Recording WAVE 'test9.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono
^CAborted by signal Interrupt...
arecord: pcm_read:2031: read error: Interrupted system call

配置:

~/。asoundrc

pcm.!default { type plug slave { pcm "hw:0,0" } }
ctl.!default { type hw card 0 }

/usr/share/alsa/alsa.conf

defaults.ctl.card 0
defaults.pcm.card 0
defaults.pcm.device 0
defaults.pcm.subdevice -1

/lib/modprobe.d aliases.conf

options snd-pcsp index=-2
options snd-usb-audio index=0
options snd_bcm2835 index=1
options cx88_alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
# Does the reordering.
options snd slots=snd-usb-audio,snd-bcm2835

aplay - l

pi@raspberrypi:~/Desktop $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Sigma [Sound Blaster Tactic(3D) Sigma], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
  Subdevices: 8/8
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
  Subdevice #4: subdevice #4
  Subdevice #5: subdevice #5
  Subdevice #6: subdevice #6
  Subdevice #7: subdevice #7
card 1: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

arecord - l

    pi@raspberrypi:~/Desktop $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: Sigma [Sound Blaster Tactic(3D) Sigma], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Answer 1

更新

我已经设法解决了这个问题!事实证明，当我运行alsamixer时，~/.asoundrc配置文件会自动更新。我的配置被新的设置覆盖了。