我有以下错误:
dtrace: error on enabled probe ID 3 (ID 7343: php15810:php:dtrace_execute_ex:function-return): invalid address (0x0) in action #2 at DIF offset 24
当我试图跟踪我的PHP脚本(sudo ./trace-php.d
)时。
基本上,我想要实现的是通过PHP函数显示分发时间/计数。这似乎有效,但我对这个错误感到恼火。我知道我可以把它发送到/dev/null
,但我想了解并修复它。
这是我的dtrace代码:
#!/usr/sbin/dtrace -Zs
#pragma D option quiet
php*:::function-entry
{
self->vts = timestamp;
self->cmd = arg0
}
php*:::function-return
/self->vts/
{
@time[copyinstr(self->cmd)] = quantize(timestamp - self->vts);
@num = count();
self->vts = 0;
self->cmd = 0;
}
profile:::tick-2s
{
printf("nPHP commands/second total: ");
printa("%@d; commands latency (ns) by pid & cmd:", @num);
printa(@time);
clear(@time);
clear(@num);
}
示例输出(运行一些php脚本时)是:
dtrace: error on enabled probe ID 3 (ID 7343: php15810:php:dtrace_execute_ex:function-return): invalid address (0x0) in action #2 at DIF offset 24
dtrace: error on enabled probe ID 3 (ID 7343: php15810:php:dtrace_execute_ex:function-return): invalid address (0x0) in action #2 at DIF offset 24
dtrace: error on enabled probe ID 3 (ID 7343: php15810:php:dtrace_execute_ex:function-return): invalid address (0x0) in action #2 at DIF offset 24
dtrace: error on enabled probe ID 3 (ID 7343: php15810:php:dtrace_execute_ex:function-return): invalid address (0x0) in action #2 at DIF offset 24
PHP commands/second total: 1549; commands latency (ns) by pid & cmd:
variable_get
value ------------- Distribution ------------- count
1024 | 0
2048 |@@@@@@@@@@@@@@@@@@@@@@@@@@@ 4
4096 |@@@@@@@ 1
8192 |@@@@@@@ 1
16384 | 0
__construct
value ------------- Distribution ------------- count
1024 | 0
2048 |@@@@@@@@@@@@@@@@@@@@ 3
4096 |@@@@@@@@@@@@@ 2
8192 |@@@@@@@ 1
16384 | 0
features_array_diff_assoc_recursive
value ------------- Distribution ------------- count
16384 | 0
32768 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 1
65536 | 0
features_export_info
value ------------- Distribution ------------- count
2048 | 0
4096 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 122
8192 |@@@@@@ 23
16384 |@ 4
32768 | 0
通过将php*::function return探测分解为不同的子句,这很可能会达到您想要的效果——一个用于是否打印输出(根据是否定义了参数),第二个用于清除线程局部变量,而不管您在第一个探测子句中做了什么或没有做什么。
这利用了DTrace按照您定义子句的确切顺序为每个探测执行代码的事实。
此示例还为自变量使用probefunc和线程id(tid)的唯一键组合,因此在进入函数调用时不会意外覆盖这些线程本地变量:
#!/usr/sbin/dtrace -Zs
#pragma D option quiet
php*:::function-entry
{
self->vts[tid,probefunc] = timestamp;
self->cmd[tid,probefunc] = arg0
}
php*:::function-return
/self->vts[tid,probefunc] && self->cmd[tid,probefunc]/
{
@time[copyinstr(self->cmd[tid,probefunc])] =
quantize(timestamp - self->vts[tid,probefunc]);
@num = count();
}
php*:::function-return
/self->vts[tid,probefunc]/
{
self->vts[tid,probefunc] = 0;
self->cmd[tid,probefunc] = 0;
}
profile:::tick-2s
{
printf("nPHP commands/second total: ");
printa("%@d; commands latency (ns) by pid & cmd:", @num);
printa(@time);
clear(@time);
clear(@num);
}
如果任何一个PHP函数都经过了尾调用优化,那么上面的内容可能不会很好地工作。要查看您是否受到这种情况的影响,请运行以下命令:
#!/usr/sbin/dtrace -s
#pragma D option quiet
php*:::function-entry
{
@e[probefunc,probename] = count();
}
php*:::function-return
{
@r[probefunc,probename] = count();
}
tick-10sec
{
printf("ENTRY POINTSn");
printa(@e);
printf("RETURN POINTSn");
printa(@r);
exit(0);
}
对入口和返回点进行排序-计数不必完全匹配,但您希望每个探测函数和名称组合的入口和返回点将匹配。要特别小心那些没有列出返回点的。这些很可能是Tail Call Optimized,你会想把它们从分析中排除,因为你永远无法计时。