使用序列设置数组元素

Question

我试图对mcedit过滤器进行扩展，该过滤器最初由CrupedPixel创建，由NanoRex编辑。他们制作的那个版本不支持1.9快照/块，所以我决定制作一个更好的、无滞后的版本！

这是代码：

# MCEdit Filter by CrushedPixel
# http://youtube.com/CrushedPixel
# Heavily Modified by NanoRex
# Major bug (and some minor ones) fixed by NanoRex
# http://youtube.com/thecaptainrex7567
from pymclevel import TAG_List
from pymclevel import TAG_Byte
from pymclevel import TAG_Int
from pymclevel import TAG_Compound
from pymclevel import TAG_Short
from pymclevel import TAG_Double
from pymclevel import TAG_String
import math
from pymclevel import MCSchematic
import mcplatform
displayName = "JetDirectionsMod"
CmdBlockTypes = {
"Normal" : 137,
"Chain" : 211,
"Repeating" : 210,
}
CmdDataTypes = {
"Facing DOWN": 0,
"Facing UP": 1,
"Facing NORTH": 2,
"Facing SOUTH": 3,
"Facing WEST": 4,
"Facing EAST": 5,
}
DataKeys = ()
for key in CmdBlockTypes.keys():
    DataKeys = DataKeys + (key,)
DataTypeKeys = ()
for key in CmdDataTypes.keys():
    DataTypeKeys = DataTypeKeys + (key,)
inputs = (
    ("Placeholders: $rot | $mot | $dir","label"),
    ("Accuracy (Degrees)", (5,1,20)),
    ("Motion Factor", (0.1,9.0)),
    ("Set Position to In Front of Player:","label"),
    ("Placeholder: $pos","label"),
    ("Set Position", False),
    ("Distance From Player", (1,5)),
    ("Relative Y Position", (0,-1000,1000)),
    ("Command Block Type:", DataKeys),
    ("Commandblock Rotation:", DataTypeKeys),
)

def perform(level, box, options):
fac = options["Accuracy (Degrees)"]
speed = options["Motion Factor"]
adjustPos = options["Set Position"]
adjustAmount = options["Distance From Player"]
ypos = options["Relative Y Position"]
C = CmdBlockTypes[options["Command Block Type:"]]
D = CmdDataTypes[options["Commandblock Rotation:"]]
C = C, '  ', D
found = False
for x in xrange(box.minx,box.maxx):
    if not found:
        for y in xrange(box.miny,box.maxy):
            if not found:
                for z in xrange(box.minz,box.maxz):
                    te = level.tileEntityAt(x,y,z)
                    if te != None:
                        try:
                            text = te["Command"].value
                            found = True
                            break
                        except:
                            pass
commands = []
if not found:
    raise Exception("Please select a command block in order to run this filter.")
for y in range(-90/fac,90/fac):
    rxm = y*fac
    rx = ((y+1)*fac)-1
    if rx == 89 :
        rx += 1
    for x in range(-180/fac,180/fac):
        rym = x*fac
        ry = ((x+1)*fac)-1
        if ry == 179 :
            ry +=1
        xdeg = math.radians(((x+1)*fac)-(fac/2))
        ydeg = math.radians(((y+1)*fac)-(fac/2))
        xmov = -speed*(math.sin(xdeg)*math.cos(ydeg))
        ymov = -speed*math.sin(ydeg) + 0.1
        zmov = speed*(math.cos(xdeg)*math.cos(ydeg))
        cmd = text.replace("$rot", "rxm="+str(rxm)+",rx="+str(rx)+",rym="+str(rym)+",ry="+str(ry))
        cmd = cmd.replace("$mot", "Motion:["+str(xmov)+","+str(ymov)+","+str(zmov)+"]")
        cmd = cmd.replace("$dir", "direction:["+str(xmov)+","+str(ymov)+","+str(zmov)+"]")
        if adjustPos == True :
            if -67.5 < ((x+1)*fac)-(fac/2) < 67.5 :
                zadj = adjustAmount
            elif -180 <= ((x+1)*fac)-(fac/2) < -112.5 or 180 >= ((x+1)*fac)-(fac/2) > 112.5 :
                zadj = -adjustAmount
            else:
                zadj = 0
            if 22.5 < ((x+1)*fac)-(fac/2) < 157.5 :
                xadj = -adjustAmount
            elif -22.5 > ((x+1)*fac)-(fac/2) > -157.5 :
                xadj = adjustAmount
            else:
                xadj = 0
            cmd = cmd.replace("$pos", "~"+str(xadj)+" ~"+str(ypos)+" "+"~"+str(zadj))
        commands.append(cmd)

number = len(commands)
size = math.sqrt(number/2)
rs = math.ceil(size)
if rs ** 2 > 4096 :
    raise Exception("Too many command blocks for the /fill command. Increase "Accuracy (Degrees)" to solve this.")
schematic = MCSchematic((rs+2,4,rs+2), mats = level.materials)
i = 0
xc = 1
zc = -1
schematic.setBlockAt(1,3,0,210)
schematic.TileEntities.append(cmdBlockTe(1,3,0,"/fill ~ ~-2 ~1 ~"+str(int(rs))+" ~-2 ~"+str(int(rs+1))+" minecraft:redstone_block"))
schematic.setBlockAt(0,3,1,210)
schematic.TileEntities.append(cmdBlockTe(0,3,1,"/fill ~1 ~-2 ~ ~"+str(int(rs+1))+" ~-2 ~"+str(int(rs))+" minecraft:stone"))
for x in range(1, int(rs+2)):
    xc += 1
    for z in range(1, int(rs+2)):
        zc += 1
        y = 2
        if i < number:
            cmd = commands[i]
            schematic.setBlockAt(x, y, z, C, D)
            control = cmdBlockTe(x, y, z, cmd)
            schematic.TileEntities.append(control)
        i += 1
        y = 0
        if i < number:
            cmd = commands[i]
            schematic.setBlockAt(x, y, z, C)
            control = cmdBlockTe(x, y, z, cmd)
            schematic.TileEntities.append(control)
        i += 1
    zc = -1

schematic_file = mcplatform.askSaveFile(mcplatform.lastSchematicsDir or mcplatform.schematicsDir, "Save Schematic As...", "", "Schematic*.schematic", ".schematic")
if schematic_file == None:
    print "ERROR: No schematic filename provided!"
    return
schematic.saveToFile(schematic_file)

def cmdBlockTe(x,y,z,cmd):
    control = TAG_Compound()
    control["Command"] = TAG_String(cmd)
    control["id"] = TAG_String(u'Control')
    control["CustomName"] = TAG_String(u'@')
    control["z"] = TAG_Int(z)
    control["y"] = TAG_Int(y)
    control["x"] = TAG_Int(x)
    return control

这给了我一个错误："用senequence设置数组元素。"以下是一些屏幕，显示了过去的情况以及问题所在：屏幕1，屏幕2。好吧，现在我知道问题的原因了。我该如何解决？我真的很想让它工作起来：l

Answer 1

C = C, ' ', D创建一个序列，即类似于(<Original C>, ' ', <Original D>)的东西，所以当您执行schematic.setBlockAt(x, y, z, C)时，C的参数是一个序列。