我不能在守护模式下运行django-celery，它说Received unregistered task of type 'djcelery_email_send'，虽然它在python manage.py celery worker时工作，请帮忙。
我正在运行芹菜 3.1，在 Ubuntu 服务器 14.04 上使用 django-celery，django-celery-email。我的 django 设置在 proj/settings/production.py 中。
django-celery 的守护进程模式是 init script init.d。/etc/init.d/celeryd 是从 https://raw.githubusercontent.com/celery/celery/3.1/extra/generic-init.d/celeryd 下载的，如下所示：
#!/bin/sh -e
# ============================================
# celeryd - Starts the Celery worker daemon.
# ============================================
#
# :Usage: /etc/init.d/celeryd {start|stop|force-reload|restart|try-restart|status}
# :Configuration file: /etc/default/celeryd
#
# See http://docs.celeryproject.org/en/latest/tutorials/daemonizing.html#generic-init-scripts
### BEGIN INIT INFO
# Provides: celeryd
# Required-Start: $network $local_fs $remote_fs
# Required-Stop: $network $local_fs $remote_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: celery task worker daemon
### END INIT INFO
#
#
# To implement separate init scripts, copy this script and give it a different
# name:
# I.e., if my new application, "little-worker" needs an init, I
# should just use:
#
# cp /etc/init.d/celeryd /etc/init.d/little-worker
#
# You can then configure this by manipulating /etc/default/little-worker.
#
VERSION=10.1
echo "celery init v${VERSION}."
if [ $(id -u) -ne 0 ]; then
echo "Error: This program can only be used by the root user."
echo " Unprivileged users must use the 'celery multi' utility, "
echo " or 'celery worker --detach'."
exit 1
fi
origin_is_runlevel_dir () {
set +e
dirname $0 | grep -q "/etc/rc..d"
echo $?
}
# Can be a runlevel symlink (e.g. S02celeryd)
if [ $(origin_is_runlevel_dir) -eq 0 ]; then
SCRIPT_FILE=$(readlink "$0")
else
SCRIPT_FILE="$0"
fi
SCRIPT_NAME="$(basename "$SCRIPT_FILE")"
DEFAULT_USER="celery"
DEFAULT_PID_FILE="/var/run/celery/%n.pid"
DEFAULT_LOG_FILE="/var/log/celery/%n.log"
DEFAULT_LOG_LEVEL="INFO"
DEFAULT_NODES="celery"
DEFAULT_CELERYD="-m celery worker --detach"
CELERY_DEFAULTS=${CELERY_DEFAULTS:-"/etc/default/${SCRIPT_NAME}"}
# Make sure executable configuration script is owned by root
_config_sanity() {
local path="$1"
local owner=$(ls -ld "$path" | awk '{print $3}')
local iwgrp=$(ls -ld "$path" | cut -b 6)
local iwoth=$(ls -ld "$path" | cut -b 9)
if [ "$(id -u $owner)" != "0" ]; then
echo "Error: Config script '$path' must be owned by root!"
echo
echo "Resolution:"
echo "Review the file carefully and make sure it has not been "
echo "modified with mailicious intent. When sure the "
echo "script is safe to execute with superuser privileges "
echo "you can change ownership of the script:"
echo " $ sudo chown root '$path'"
exit 1
fi
if [ "$iwoth" != "-" ]; then # S_IWOTH
echo "Error: Config script '$path' cannot be writable by others!"
echo
echo "Resolution:"
echo "Review the file carefully and make sure it has not been "
echo "modified with malicious intent. When sure the "
echo "script is safe to execute with superuser privileges "
echo "you can change the scripts permissions:"
echo " $ sudo chmod 640 '$path'"
exit 1
fi
if [ "$iwgrp" != "-" ]; then # S_IWGRP
echo "Error: Config script '$path' cannot be writable by group!"
echo
echo "Resolution:"
echo "Review the file carefully and make sure it has not been "
echo "modified with malicious intent. When sure the "
echo "script is safe to execute with superuser privileges "
echo "you can change the scripts permissions:"
echo " $ sudo chmod 640 '$path'"
exit 1
fi
}
if [ -f "$CELERY_DEFAULTS" ]; then
_config_sanity "$CELERY_DEFAULTS"
echo "Using config script: $CELERY_DEFAULTS"
. "$CELERY_DEFAULTS"
fi
# Sets --app argument for CELERY_BIN
CELERY_APP_ARG=""
if [ ! -z "$CELERY_APP" ]; then
CELERY_APP_ARG="--app=$CELERY_APP"
fi
CELERYD_USER=${CELERYD_USER:-$DEFAULT_USER}
# Set CELERY_CREATE_DIRS to always create log/pid dirs.
CELERY_CREATE_DIRS=${CELERY_CREATE_DIRS:-0}
CELERY_CREATE_RUNDIR=$CELERY_CREATE_DIRS
CELERY_CREATE_LOGDIR=$CELERY_CREATE_DIRS
if [ -z "$CELERYD_PID_FILE" ]; then
CELERYD_PID_FILE="$DEFAULT_PID_FILE"
CELERY_CREATE_RUNDIR=1
fi
if [ -z "$CELERYD_LOG_FILE" ]; then
CELERYD_LOG_FILE="$DEFAULT_LOG_FILE"
CELERY_CREATE_LOGDIR=1
fi
CELERYD_LOG_LEVEL=${CELERYD_LOG_LEVEL:-${CELERYD_LOGLEVEL:-$DEFAULT_LOG_LEVEL}}
CELERY_BIN=${CELERY_BIN:-"celery"}
CELERYD_MULTI=${CELERYD_MULTI:-"$CELERY_BIN multi"}
CELERYD_NODES=${CELERYD_NODES:-$DEFAULT_NODES}
export CELERY_LOADER
if [ -n "$2" ]; then
CELERYD_OPTS="$CELERYD_OPTS $2"
fi
CELERYD_LOG_DIR=`dirname $CELERYD_LOG_FILE`
CELERYD_PID_DIR=`dirname $CELERYD_PID_FILE`
# Extra start-stop-daemon options, like user/group.
if [ -n "$CELERYD_CHDIR" ]; then
DAEMON_OPTS="$DAEMON_OPTS --workdir=$CELERYD_CHDIR"
fi
check_dev_null() {
if [ ! -c /dev/null ]; then
echo "/dev/null is not a character device!"
exit 75 # EX_TEMPFAIL
fi
}
maybe_die() {
if [ $? -ne 0 ]; then
echo "Exiting: $* (errno $?)"
exit 77 # EX_NOPERM
fi
}
create_default_dir() {
if [ ! -d "$1" ]; then
echo "- Creating default directory: '$1'"
mkdir -p "$1"
maybe_die "Couldn't create directory $1"
echo "- Changing permissions of '$1' to 02755"
chmod 02755 "$1"
maybe_die "Couldn't change permissions for $1"
if [ -n "$CELERYD_USER" ]; then
echo "- Changing owner of '$1' to '$CELERYD_USER'"
chown "$CELERYD_USER" "$1"
maybe_die "Couldn't change owner of $1"
fi
if [ -n "$CELERYD_GROUP" ]; then
echo "- Changing group of '$1' to '$CELERYD_GROUP'"
chgrp "$CELERYD_GROUP" "$1"
maybe_die "Couldn't change group of $1"
fi
fi
}
check_paths() {
if [ $CELERY_CREATE_LOGDIR -eq 1 ]; then
create_default_dir "$CELERYD_LOG_DIR"
fi
if [ $CELERY_CREATE_RUNDIR -eq 1 ]; then
create_default_dir "$CELERYD_PID_DIR"
fi
}
create_paths() {
create_default_dir "$CELERYD_LOG_DIR"
create_default_dir "$CELERYD_PID_DIR"
}
export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"
_get_pidfiles () {
# note: multi < 3.1.14 output to stderr, not stdout, hence the redirect.
${CELERYD_MULTI} expand "${CELERYD_PID_FILE}" ${CELERYD_NODES} 2>&1
}
_get_pids() {
found_pids=0
my_exitcode=0
for pidfile in $(_get_pidfiles); do
local pid=`cat "$pidfile"`
local cleaned_pid=`echo "$pid" | sed -e 's/[^0-9]//g'`
if [ -z "$pid" ] || [ "$cleaned_pid" != "$pid" ]; then
echo "bad pid file ($pidfile)"
one_failed=true
my_exitcode=1
else
found_pids=1
echo "$pid"
fi
if [ $found_pids -eq 0 ]; then
echo "${SCRIPT_NAME}: All nodes down"
exit $my_exitcode
fi
done
}
_chuid () {
su "$CELERYD_USER" -c "$CELERYD_MULTI $*"
}
start_workers () {
if [ ! -z "$CELERYD_ULIMIT" ]; then
ulimit $CELERYD_ULIMIT
fi
_chuid $* start $CELERYD_NODES $DAEMON_OPTS
--pidfile="$CELERYD_PID_FILE"
--logfile="$CELERYD_LOG_FILE"
--loglevel="$CELERYD_LOG_LEVEL"
$CELERY_APP_ARG
$CELERYD_OPTS
}
dryrun () {
(C_FAKEFORK=1 start_workers --verbose)
}
stop_workers () {
_chuid stopwait $CELERYD_NODES --pidfile="$CELERYD_PID_FILE"
}
restart_workers () {
_chuid restart $CELERYD_NODES $DAEMON_OPTS
--pidfile="$CELERYD_PID_FILE"
--logfile="$CELERYD_LOG_FILE"
--loglevel="$CELERYD_LOG_LEVEL"
$CELERY_APP_ARG
$CELERYD_OPTS
}
kill_workers() {
_chuid kill $CELERYD_NODES --pidfile="$CELERYD_PID_FILE"
}
restart_workers_graceful () {
echo "WARNING: Use with caution in production"
echo "The workers will attempt to restart, but they may not be able to."
local worker_pids=
worker_pids=`_get_pids`
[ "$one_failed" ] && exit 1
for worker_pid in $worker_pids; do
local failed=
kill -HUP $worker_pid 2> /dev/null || failed=true
if [ "$failed" ]; then
echo "${SCRIPT_NAME} worker (pid $worker_pid) could not be restarted"
one_failed=true
else
echo "${SCRIPT_NAME} worker (pid $worker_pid) received SIGHUP"
fi
done
[ "$one_failed" ] && exit 1 || exit 0
}
check_status () {
my_exitcode=0
found_pids=0
local one_failed=
for pidfile in $(_get_pidfiles); do
if [ ! -r $pidfile ]; then
echo "${SCRIPT_NAME} down: no pidfiles found"
one_failed=true
break
fi
local node=`basename "$pidfile" .pid`
local pid=`cat "$pidfile"`
local cleaned_pid=`echo "$pid" | sed -e 's/[^0-9]//g'`
if [ -z "$pid" ] || [ "$cleaned_pid" != "$pid" ]; then
echo "bad pid file ($pidfile)"
one_failed=true
else
local failed=
kill -0 $pid 2> /dev/null || failed=true
if [ "$failed" ]; then
echo "${SCRIPT_NAME} (node $node) (pid $pid) is down, but pidfile exists!"
one_failed=true
else
echo "${SCRIPT_NAME} (node $node) (pid $pid) is up..."
fi
fi
done
[ "$one_failed" ] && exit 1 || exit 0
}
case "$1" in
start)
check_dev_null
check_paths
start_workers
;;
stop)
check_dev_null
check_paths
stop_workers
;;
reload|force-reload)
echo "Use restart"
;;
status)
check_status
;;
restart)
check_dev_null
check_paths
restart_workers
;;
graceful)
check_dev_null
restart_workers_graceful
;;
kill)
check_dev_null
kill_workers
;;
dryrun)
check_dev_null
dryrun
;;
try-restart)
check_dev_null
check_paths
restart_workers
;;
create-paths)
check_dev_null
create_paths
;;
check-paths)
check_dev_null
check_paths
;;
*)
echo "Usage: /etc/init.d/${SCRIPT_NAME} {start|stop|restart|graceful|kill|dryrun|create-paths}"
exit 64 # EX_USAGE
;;
esac
exit 0
etc/default/celeryd 如下：
CELERYD_NODES="proj"
# but you can also start multiple and configure settings
# for each in CELERYD_OPTS (see `celery multi --help` for examples):
#CELERYD_NODES="worker1 worker2 worker3"
# alternatively, you can specify the number of nodes to start:
#CELERYD_NODES=10
export DJANGO_SETTINGS_MODULE='proj.settings.production'
export PYTHONPATH='$PYTHONPATH:/home/ubuntu/proj'
# Absolute or relative path to the 'celery' command:
#CELERY_BIN="/usr/local/bin/celery"
CELERY_BIN="/home/ubuntu/virtualenv/proj/bin/celery"
# App instance to use
# comment out this line if you don't use an app
#CELERY_APP="proj"
# or fully qualified:
#CELERY_APP="proj.tasks:app"
# Where to chdir at start.
CELERYD_CHDIR="/home/ubuntu/proj/"
# Extra command-line arguments to the worker
CELERYD_OPTS="--time-limit=300 --concurrency=8"
# %N will be replaced with the first part of the nodename.
CELERYD_LOG_FILE="/var/log/celery/%N.log"
CELERYD_PID_FILE="/var/run/celery/%N.pid"
# Workers should run as an unprivileged user.
# You need to create this user manually (or you can choose
# a user/group combination that already exists, e.g. nobody).
CELERYD_USER="ubuntu"
CELERYD_GROUP="ubuntu"
# If enabled pid and log directories will be created if missing,
# and owned by the userid/group configured.
CELERY_CREATE_DIRS=1
var/log/celery/proj.log 的错误日志片段：
If you depend on pickle then you should set a setting to disable this
warning and to be sure that everything will continue working
when you upgrade to Celery 3.2::
CELERY_ACCEPT_CONTENT = ['pickle', 'json', 'msgpack', 'yaml']
You must only enable the serializers that you will actually use.
warnings.warn(CDeprecationWarning(W_PICKLE_DEPRECATED))
[2016-06-07 07:22:10,699: INFO/MainProcess] Connected to amqp://guest:**@127.0.0.1:5672//
[2016-06-07 07:22:10,708: INFO/MainProcess] mingle: searching for neighbors
[2016-06-07 07:22:11,715: INFO/MainProcess] mingle: all alone
[2016-06-07 07:22:11,722: WARNING/MainProcess] proj@ip-172-31-20-158 ready.
[2016-06-07 07:22:44,464: ERROR/MainProcess] Received unregistered task of type 'djcelery_email_send'.
The message has been ignored and discarded.
Did you remember to import the module containing this task?
Or maybe you are using relative imports?
Please see for more information.
The full contents of the message body was:
{'errbacks': None, 'callbacks': None, 'retries': 0, 'taskset': None, 'expires': None, 'timelimit': (None, None), 'args': ([{'cc': [], 'to': ['cjh@yahoo.com', '649858321@qq.com', 'xu_jordan@163.com', '123456@qq.com'], 'alternatives': [], 'bcc': [], 'attachments': [], 'reply_to': [], 'headers': {}, 'subject': 'A show: i is on the way', 'from_email': 'no-reply@angelscity.co', 'body': 'i'}], {}), 'eta': None, 'task': 'djcelery_email_send', 'chord': None, 'kwargs': {}, 'id': '9b108b79-4ac9-4039-bca0-486c0241930f', 'utc': True} (587b)
Traceback (most recent call last):
File "/home/ubuntu/virtualenv/proj/lib/python3.4/site-packages/celery/worker/consumer.py", line 456, in on_task_received
strategies[name](message, body,
KeyError: 'djcelery_email_send'
我终于搬到了主管，它可以工作。
以下是可能遇到相同问题的任何人的详细信息。
- 安装主管：
sudo apt-get install supervisord。还有一些其他选项可以安装它，例如easy_install，但请确保您的easy_install适用于python 2.x.supervisord仅支持Python 2.4+而不是Python 3。 -
将 ceelryd.conf 添加到/etc/supervisor/conf.d，如下所示：
[program:celery] ;command=pythonpath manage.pypath celery worker --settings=proj.settings command=/home/username/virtualenvs/projenv/bin/python /home/username/proj/manage.py celery worker --settings=proj.settings environment=PYTHONPATH='/home/username/virtualenvs/projenv' directory=/home/username/virtualenvs/projenv user=username numprocs=1 stdout_logfile=/var/log/celeryd.log stderr_logfile=/var/log/celeryd.log autostart=true autorestart=true startsecs=10 ; Need to wait for currently executing tasks to finish at shutdown. ; Increase this if you have very long running tasks. stopwaitsecs = 600 ; if rabbitmq is supervised, set its priority higher ; so it starts first priority=998 -
重读和更新主管：
sudo supervisorctl reread && sudo supervisorctl update - 重启芹菜：
sudo supervisorctl restart celery