c-使用arduino wifi屏蔽从网络读取数据

Question

我有arduino wifi屏蔽。我想从有一些命令的网页上读取文本文件。我将解析html文件中的命令，并从网页中控制arduino。。问题是我不明白我应该如何读取数据，这样arduino就会远程打开led。如果我每次需要打开串行监视器来打开led时都使用下面的代码。但我希望这个过程在arduino内部完成，我不想依赖串行监视器。正如我所说的，它应该在没有连接电脑的情况下工作。我怎样才能做到这一点？我想知道我应该首先理解什么。

#include <SPI.h>
#include <WiFi.h>
char lf=10;
int x=0;
char ssid[] = "AIRTIES_RT-205"; //  your network SSID (name)
char pass[] = "";    // your network password (use for WPA, or use as key for WEP)
int keyIndex = 0;            // your network key Index number (needed only for WEP)
String readString, readString1;
int status = WL_IDLE_STATUS;
// if you don't want to use DNS (and reduce your sketch size)
// use the numeric IP instead of the name for the server:
//IPAddress server(74,125,232,128);  // numeric IP for Google (no DNS)
char server[] = "taylankaan-001-site1.myasp.net";    // name address for Google (using DNS)
// Initialize the Ethernet client library
// with the IP address and port of the server
// that you want to connect to (port 80 is default for HTTP):
WiFiClient client;
void setup() {
  //Initialize serial and wait for port to open:
  Serial.begin(9600);
  while (!Serial) {
    ; // wait for serial port to connect. Needed for Leonardo only
  }
  // check for the presence of the shield:
  if (WiFi.status() == WL_NO_SHIELD) {
    Serial.println("WiFi shield not present");
    // don't continue:
    while (true);
  }
  String fv = WiFi.firmwareVersion();
  if ( fv != "1.1.0" )
    Serial.println("Please upgrade the firmware");
  // attempt to connect to Wifi network:
  while (status != WL_CONNECTED) {
  //  Serial.print("Attempting to connect to SSID: ");
    Serial.println(ssid);
    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
    status = WiFi.begin(ssid);
    // wait 10 seconds for connection:
    delay(10000);
  }
  //printWifiStatus();
  //Serial.println("nStarting connection to server...");
  // if you get a connection, report back via serial:
  if (client.connect(server, 80)) {
    Serial.println("connected to server");
    // Make a HTTP request:
    client.println("GET /asp.txt HTTP/1.1");
    client.println("Host: taylankaan-001-site1.myasp.net");
    client.println("Connection: close");
    client.println();
  }
}
String command;
void loop() {
while(client.connected() && !client.available()) delay(1); //waits for data
  while (client.connected() || client.available()) { //connected or data available
    char c = client.read();
    if (c == 'n') {
      parseCommand(command);
      command = "";
    }
    else {
      command += c;
    }
  }
   if (!client.connected()) {
    Serial.println();
    Serial.println("disconnecting from server.");
    client.stop();
    while (true);
  }
  }


void printWifiStatus() {
  // print the SSID of the network you're attached to:
    Serial.println("Connected to network");
    Serial.print(WiFi.SSID());

 if(WiFi.RSSI()>=-35){
     Serial.println("Very good connection");
   }
   if(WiFi.RSSI()>=-65 && WiFi.RSSI()<-35){
     Serial.println("%50 good connected");
   }
   if(WiFi.RSSI()<-65){
     Serial.println("Worst connection");
   }

  }


void parseCommand(String com) {
  String part1;
  String part2;
  //PINON 13
  part1 = com.substring(0, com.indexOf(" "));
  part2 = com.substring(com.indexOf(" ") + 1);
  if (part1.equalsIgnoreCase("openled")) {
    digitalWrite(9, HIGH);
  } 
}

Answer 1

这很有趣，但在意识到这是关于串行端口的之后，我尝试了一些事情，等待串行端口的原因是：while（！串行）{；//等待串行端口连接。仅莱昂纳多需要}我不在乎这个用了什么，现在看到它阻止了一切，除非串行端口打开。