对于以下docker文件，
FROM python:3.9-slim-buster
WORKDIR /python-docker
COPY requirements.txt requirements.txt
RUN python3 -m pip install --upgrade pip
RUN pip3 install -r requirements.txt
COPY . .
EXPOSE 5000
CMD [ "python3", "-m" , "flask", "run", "--host=0.0.0.0"]
需求文件如下，
boto3==1.21.32
Flask==2.2.2
Flask_Cors==3.0.10
hvac==1.0.2
PyJWT==2.6.0
PyMySQL==0.10.1
zenpy==2.0.24
gunicorn==20.1.0
pandas==1.4.2
当我尝试用以下命令构建多弧docker文件时，docker buildx build --platform linux/amd64,linux/arm64,linux/arm/v7 -t name/flask-docker:latest --push .
显示如下输出:
× pip subprocess to install build dependencies did not run successfully.
#0 148.6 │ exit code: 1
#0 148.6 ╰─> [262 lines of output]
#0 148.6 Collecting setuptools>=51.0.0
#0 148.6 Downloading setuptools-65.6.0-py3-none-any.whl (1.2 MB)
#0 148.6 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 7.0 MB/s eta 0:00:00
#0 148.6 Collecting wheel
#0 148.6 Downloading wheel-0.38.4-py3-none-any.whl (36 kB)
#0 148.6 Collecting Cython<3,>=0.29.24
#0 148.6 Downloading Cython-0.29.32-py2.py3-none-any.whl (986 kB)
#0 148.6 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 986.3/986.3 kB 9.1 MB/s eta 0:00:00
#0 148.6 Collecting oldest-supported-numpy>=0.10
#0 148.6 Downloading oldest_supported_numpy-2022.11.19-py3-none-any.whl (4.9 kB)
#0 148.6 Collecting numpy==1.19.3
#0 148.6 Downloading numpy-1.19.3.zip (7.3 MB)
#0 148.6 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 7.3/7.3 MB 13.4 MB/s eta 0:00:00
#0 148.6 Installing build dependencies: started
#0 148.6 Installing build dependencies: finished with status 'done'
#0 148.6 Getting requirements to build wheel: started
#0 148.6 Getting requirements to build wheel: finished with status 'done'
#0 148.6 Preparing metadata (pyproject.toml): started
#0 148.6 Preparing metadata (pyproject.toml): still running...
#0 148.6 Preparing metadata (pyproject.toml): finished with status 'error'
#0 148.6 error: subprocess-exited-with-error
#0 148.6
#0 148.6 × Preparing metadata (pyproject.toml) did not run successfully.
#0 148.6 │ exit code: 1
#0 148.6 ╰─> [227 lines of output]
#0 148.6 Running from numpy source directory.
#0 148.6 setup.py:480: UserWarning: Unrecognized setuptools command, proceeding with generating Cython sources and expanding templates
#0 148.6 run_build = parse_setuppy_commands()
#0 148.6 Processing numpy/random/_bounded_integers.pxd.in
#0 148.6 Processing numpy/random/_common.pyx
#0 148.6 Processing numpy/random/_mt19937.pyx
#0 148.6 Processing numpy/random/_philox.pyx
#0 148.6 Processing numpy/random/mtrand.pyx
#0 148.6 Processing numpy/random/bit_generator.pyx
RuntimeError: Broken toolchain: cannot link a simple C program
#0 148.6 [end of output]
#0 148.6
#0 148.6 note: This error originates from a subprocess, and is likely not a problem with pip.
#0 148.6 error: metadata-generation-failed
#0 148.6
#0 148.6 × Encountered error while generating package metadata.
#0 148.6 ╰─> See above for output.
#0 148.6
#0 148.6 note: This is an issue with the package mentioned above, not pip.
#0 148.6 hint: See above for details.
#0 148.6 [end of output]
#0 148.6
#0 148.6 note: This error originates from a subprocess, and is likely not a problem with pip.
#0 148.6 error: subprocess-exited-with-error
#0 148.6
#0 148.6 × pip subprocess to install build dependencies did not run successfully.
#0 148.6 │ exit code: 1
#0 148.6 ╰─> See above for output.
#0 148.6
#0 148.6 note: This error originates from a subprocess, and is likely not a problem with pip.
------
Dockerfile:9
--------------------
7 | RUN python3 -m pip install --upgrade pip
8 |
9 | >>> RUN pip3 install -r requirements.txt
由于上面的问题说它不是pip的问题，不能确切地知道它是否是任何底层软件包的问题?
注意:我试着从需求文件中删除熊猫，它正在工作，但我需要它，因为我有一个基于它的导入。
好吧，伙计，试着一个一个地安装包，或者你可以删除每个包前面的版本，这样它就会自动调整就像这样
boto3
Flask
Flask_Cors
hvac
PyJWT
PyMySQL
zenpy
gunicorn
pandas```
#I think it will work fine