我编写了一个8b10b编码器，该编码器生成一个字节流，该字节流将发送到串行发送器，该发送器首先按LSb发送字节。
我在这里所做的基本上是将10比特的组(从输入字节流编码(放在8比特的组上，所以不同数量的比特从一个输出字节转移到下一个输出比特——有点像音乐/节奏。
该程序已经成功测试，但对于我的应用程序来说，它的速度大约慢了4-5倍。我认为这是因为每个比特都必须在数组中查找。我的直觉告诉我，我们可以通过某种滚动掩码来加快速度，但我还不知道如何做到这一点，即使把布尔值的三维数组换成整数的二维数组。
有指针或其他想法吗？
这是代码。请忽略大多数宏和一些与决定要写入哪个字节有关的代码，因为这是特定于应用程序的。
标题：
#ifndef TX_BYTESTREAM_GEN_H_INCLUDED
#define TX_BYTESTREAM_GEN_H_INCLUDED
#include <stdint.h> //for standard portable types such as uint16_t
#define MAX_USB_TRANSFER_SIZE 1016 //Bytes, size of the max payload in a USB transaction. Determined using FT4222_GetMaxTRansferSize()
#define MAX_USB_PACKET_SIZE 62 //Bytes, max size of the payload of a single USB packet
#define MANDATORY_TX_PACKET_BLOCK 5 //Bytes, constant - equal to the minimum number of bytes of TX packet necessary to exactly transfer blocks of 10 bits of encoded data (LCF of 8 and 10)
#define SYNC_CHARS_MAX_INTERVAL 172 //Target number of payload bytes between sync chars. Max is 188 before desynchronisation
#define ROUND_UP(N, S) ((((N) + (S) - 1) / (S)) * (S)) //Macro to round up the integer N to the largest multiple of the integer S
#define ROUND_DOWN(N,S) ((N / S) * S) //Same rounding down
#define N_SYNC_CHAR_PAIRS_IN_PCKT(pcktSz) (ROUND_UP((pcktSz*1000/(SYNC_CHARS_MAX_INTERVAL+2)),1000)/1000) //Number of sync (K28.5) character/byte pairs in a given packet
#define TX_PAYLOAD_SIZE(pcktSz) ((pcktSz*4/5)-2*N_SYNC_CHAR_PAIRS_IN_PCKT(pcktSz)) //Size in bytes of the payload data before encoding in a single TX packet
#define MAX_TX_PACKET_SIZE (ROUND_DOWN((MAX_USB_TRANSFER_SIZE-MAX_USB_PACKET_SIZE),(MAX_USB_PACKET_SIZE*MANDATORY_TX_PACKET_BLOCK))) //Maximum size in bytes of a TX packet
#define DEFAULT_TX_PACKET_SIZE (MAX_TX_PACKET_SIZE-MAX_USB_PACKET_SIZE*MANDATORY_TX_PACKET_BLOCK) //Default size in bytes of a TX packet with some margin
#define MAX_TX_PAYLOAD_SIZE (TX_PAYLOAD_SIZE(MAX_TX_PACKET_SIZE)) //Maximum size in bytes of the payload in a TX packet
#define DEFAULT_TX_PAYLOAD_SIZE (TX_PAYLOAD_SIZE(DEFAULT_TX_PACKET_SIZE))//Default size in bytes of the payload in a TX packet with some margin
//See string descriptors below for definitions. Error codes are individual bits so can be combined.
enum ErrCode
{
NO_ERR = 0,
INVALID_DIN_SIZE = 1,
INVALID_DOUT_SIZE = 2,
NULL_DIN_PTR = 4,
NULL_DOUT_PTR = 8
};
char const * const ERR_CODE_DESC[] = {
"No error",
"Invalid size of input data",
"Invalid size of output buffer",
"Input data pointer is NULL",
"Output buffer pointer is NULL"
};
/** @brief Generates the bytestream to the transmitter by encoding the incoming data using 8b10b encoding
and inserting K28.5 synchronisation characters to maintain the synchronisation with the demodulator (LVDS passthrough mode)
@arg din is a pointer to an allocated array of bytes which contains the data to encode
@arg dinSize is the size of din in bytes. This size must be equal to TX_PAYLOAD_SIZE(doutSize)
@arg dout is a pointer to an allocated array of bytes which is intended to contain the output bytestream to the transmitter
@arg doutSize is the size of dout in bytes. This size must meet the conditions at the top of this function's implementation. Use DEFAULT_TX_PACKET_SIZE if in doubt.
@return error code (c.f. ErrCode) **/
int TX_gen_bytestream(uint8_t *din, uint16_t dinSize, uint8_t *dout, uint16_t doutSize);
#endif // TX_BYTESTREAM_GEN_H_INCLUDED
源文件：
#include "TX_bytestream_gen.h"
#include <cstddef> //NULL
#define N_BYTE_VALUES (256+1) //256 possible data values + 1 special character (only accessible to this module)
#define N_ENCODED_BITS 10 //Number of bits corresponding to the 8b10b encoding of a byte
//Map the current running disparity, the desired value to encode to the array of encoded bits for 8b10b encoding.
//The Last value is the K28.5 sync character, only accessible to this module
//Notation = MSb to LSb
bool const encodedBits[2][N_BYTE_VALUES][N_ENCODED_BITS] =
{
//Long table (see appendix)
};
//New value of the running disparity after encoding with the specified previous running disparity and requested byte value (c.f. above)
bool const encodingDisparity[2][N_BYTE_VALUES] =
{
//Long table (see appendix)
};
int TX_gen_bytestream(uint8_t *din, uint16_t dinSize, uint8_t *dout, uint16_t doutSize)
{
static bool RDp = false; //Running disparity is initially negative
int ret = 0;
//If the output buffer size is not a multiple of the mandatory payload block or of the USB packet size, or if it cannot be held in a single USB transaction
//return an invalid output buffer size error
if(doutSize == 0 || (doutSize % MANDATORY_TX_PACKET_BLOCK) || (doutSize % MAX_USB_PACKET_SIZE) || (doutSize > MAX_TX_PACKET_SIZE)) //Temp
ret |= INVALID_DOUT_SIZE;
//If the input data size is not consistent with the output buffer size, return the appropriate error code
if(dinSize == 0 || dinSize != TX_PAYLOAD_SIZE(doutSize))
ret |= INVALID_DIN_SIZE;
if(din == NULL)
ret |= NULL_DIN_PTR;
if(dout == NULL)
ret |= NULL_DOUT_PTR;
//If everything checks out, carry on
if(ret == NO_ERR)
{
uint16_t iByteIn = 0; //Index of the byte of input data currently being processed
uint16_t iByteOut = 0; //Index of the output byte currently being written to
uint8_t iBitOut = 0; //Starts with LSb
int16_t nBytesUntilSync = 0; //Countdown of bytes until a sync marker needs to be sent. Cyclic.
//For all output bytes to generate
while(iByteOut < doutSize)
{
bool sync = false; //Initially this byte is not considered a sync byte (in which case the next byte of data will be processed)
//If the maximum interval between sync characters has been reached, mark the two next bytes as sync bytes and reset the counter
if(nBytesUntilSync <= 0)
{
sync = true;
if(nBytesUntilSync == -1) //After the second SYNC is written, the counter is reset
{
nBytesUntilSync = SYNC_CHARS_MAX_INTERVAL;
}
}
//Append bit by bit the encoded data of the byte to write to the output bitstream (carried over from byte to byte) - LSb first
//The byte to write is either the last byte of the encodedBits map (the sync character K28.5) if sync is set, or the next byte of
//input data if it isn't
uint16_t const byteToWrite = (sync?(N_BYTE_VALUES-1):din[iByteIn]);
for(int8_t iEncodedBit = N_ENCODED_BITS-1 ; iEncodedBit >= 0 ; --iEncodedBit, iBitOut++)
{
//If the current output byte is complete, reset the bit index and select the next one
if(iBitOut >= 8)
{
iByteOut++;
iBitOut = 0;
}
//Effectively sets the iBitOut'th bit of the iByteOut'th byte out to the encoded value of the byte to write
bool bitToWrite = encodedBits[RDp][byteToWrite][iEncodedBit]; //Temp
dout[iByteOut] ^= (-bitToWrite ^ dout[iByteOut]) & (1 << iBitOut);
}
//The running disparity is also updated as per the standard (to achieve DC balance)
RDp = encodingDisparity[RDp][byteToWrite]; //Update the running disparity
//If sync was not set, this means a byte of the input data has been processed, in which case take the next one in
//Also decrement the synchronisation counter
if(!sync) {
iByteIn++;
}
//In any case, decrease the synchronisation counter. Even sync characters decrease it (c.f. top of while loop)
nBytesUntilSync--;
}
}
return ret;
}
测试台：
#include <iostream>
#include "TX_bytestream_gen.h"
#define PACKET_DURATION 0.000992 //In seconds, time of continuous data stream corresponding to one packet (5MHz output, default packet size)
#define TIME_TO_SIMULATE 10 //In seconds
#define PACKET_SIZE DEFAULT_TX_PACKET_SIZE
#define PAYLOAD_SIZE DEFAULT_TX_PAYLOAD_SIZE
#define N_ITERATIONS (TIME_TO_SIMULATE/PACKET_DURATION)
#include <chrono>
using namespace std;
//Testbench: measure the time taken to simulate TIME_TO_SIMULATE seconds of continuous encoding
int main()
{
uint8_t toEncode[PAYLOAD_SIZE] = {100}; //Dummy data, doesn't matter
uint8_t out[PACKET_SIZE] = {0};
std::chrono::time_point<std::chrono::system_clock> start, end;
start = std::chrono::system_clock::now();
for(unsigned int i = 0 ; i < N_ITERATIONS ; i++)
{
TX_gen_bytestream(toEncode, PAYLOAD_SIZE, out, PACKET_SIZE);
}
end = std::chrono::system_clock::now();
std::chrono::duration<double> elapsed_seconds = end - start;
std::cout << "Task execution time: " << elapsed_seconds.count()/TIME_TO_SIMULATE*100 << "% (for " << TIME_TO_SIMULATE << "s simulated)n";
return 0;
}
附录：查阅表格。我没有足够的字符粘贴在这里，但看起来是这样的：
bool const encodedBits[2][N_BYTE_VALUES][N_ENCODED_BITS] =
{
//Running disparity = RD-
{
{1,0,0,1,1,1,0,1,0,0},
//...
},
//Running disparity = RD+
{
{0,1,1,0,0,0,1,0,1,1},
//...
}
};
bool const encodingDisparity[2][N_BYTE_VALUES] =
{
//Previous running disparity was RD-
{
0,
//...
},
//Previous running disparity was RD+
{
1,
//...
}
};
如果您一次只做一个字节，而不是一次做一个比特，那么速度会快得多。
首先更改存储查找表的方式。你应该有这样的东西：
// conversion from (RD, byte) to (RD, 10-bit code)
// in each word, the lower 10 bits are the code,
// and bit 10 (the 11th bit) is the new RD
// The first 256 values are for RD -1, the next
// for RD 1
static const uint16_t BYTE_TO_CODE[512] = {
...
}
然后，您需要更改我们的编码循环，以便一次写入一个字节。您可以使用uint16_t来存储您输出的每个字节的剩余位。
类似这样的东西(我没有弄清楚你的同步字节逻辑，但大概你可以把它放在输入或输出字节循环中(：
// returns next isRD1
bool TX_gen_bytestream(uint8_t *dest, const uint8_t *src, size_t src_len, bool isRD1)
{
// bits generated, but not yet written, LSB first
uint16_t bits = 0;
// number of bits in bits
unsigned numbits = 0;
// current RD, either 0 or 256
uint16_t rd = isRD1 ? 256 : 0;
for (const uint8_t *end = src + src_len; src < end; ++src) {
// lookup code and next rd
uint16_t code = BYTE_TO_CODE[rd + *src];
// new rd from code bit 10
rd = (code>>2) & 256;
// store bits
bits |= (code & (uint16_t)0x03FF) << numbits;
numbits+=10;
// write out any complete bytes
while(numbits >= 8) {
*dest++ = (uint8_t)bits;
bits >>=8;
numbits-=8;
}
}
// If src_len isn't divisible by 4, then we have some extra bits
if (numbits) {
*dest = (uint8_t)bits;
}
return !!rd;
}